3 Tips You Need to Know Before Your Commercial Generator Installation

Posted by Casandra Properties on Tuesday, September 8th, 2020 at 10:11am.

If you are about to get a generator installed on your construction site you probably have a lot of questions. In order for work on the site to go smoothly, you need to ensure that you have a generator on hand.

While generators on this site are common there are three essential things you must know before you install one. Here is a generator installation guide that will help you make the right decisions.

Commercial Generator Installation

1. Your Generators Environment is Important

Your commercial generator is best kept outside. Make sure that it is properly installed on a concrete slab.

The generator set should have clear spaces all around it. Two to three feet of space is best.

Ensure that the generator is stored in a dry place, make sure that the ground is not soft. Install the generator on the high-level ground. This will prevent water damage in case of rain and flooding.

Make sure the area is level enough to prevent water from pooling all around the generator. 

2. Have Restrictions on Who Can Get Near the Unit

Generators can get very hot while they are operating and this can lead to severe burns. You should have safety barriers installed around the generator. These safety barriers may be fences, posts, or even bars.

Hire an industrial rigger if you need to lift and move the generator. This will ensure that the generator is not a danger to employees at any time. An industrial rigger will also evaluate your construction site's electrical system and ensure that the generator is installed or reinstalled quickly.

3. Essential Maintenance and Safety Tips You Should Know Before Generator Installation

When you are ready to move the generator there is a safety procedure called lockout/tagout that should be used. This strategy is easy to implement.

When you are ready to move the generator you should have someone that is specially assigned turn it off. This same person can then disconnect any machinery from the generator.

Bear in mind too that you may need someone to check that the generator has enough fuel at all times. You will also need someone to check on the coolant levels.

As mentioned before generators can get very hot so having enough coolant is essential at all times. Make sure that you check the oil levels and change the oil whenever you notice that it is starting to get too dirty.

Ensure that your air vents are in good shape and free from any dirt or debris. As you can see, there is a lot to be done. The best way to ensure that everything goes smoothly is to carefully assign people to check on these things regularly.

Get Powered Up

The generator installation tips given here will help to ensure that you get the best usage out of your generator. Once you take the time to place the generator in the right environment and have restrictions on who is allowed near the unit you should have greater safety on your construction site.

You should also ensure that you assign individuals to particular tasks to help keep the generator up and running. If you would like some more information on construction and real estate, please visit the commercial real estate section of our website.

Leave a Comment

Format example: you@domain.com
Format example: yourwebsitename.com

Sign up for email updates